Chassis
INSTALLATION OF INTERNAL WHEEL COM-
PONENTS
To proceed with the installation of the internal
wheel components, initially proceed from the right
side as described:
•
Position the bearing (10) in its seat and
use the appropriate punch to insert as
far as it will go.
Specific tooling
020376Y Adaptor handle
020359Y 42 x 47 mm Adaptor
•
Insert the circlip (11).
•
Insert the oil seal (12) flush with the
outside of the hub.
•
Insert the spacer (13).
CHAS - 184
TUAREG 660