APRILIA TUAREG 660 Service Station Manual page 111

TUAREG 660
•
To carry out the one or more key pro-
gramming procedures, up to a maxi-
mum of four, you must connect the
motorcycle to the diagnostic tool.
•
Turn key to "ON" and insert the USER
CODE where required.
•
Carry out the self-diagnosis of the
dashboard and enter the "SETTINGS"
section by clicking on "RESET KEYS".
•
At this point, a screen with a warning
message will be visible. Press "OK"
and start programming the keys.
NOTE
IF THE IMMOBILIZER ANTENNA IS DISCONNECTED, YOU
WILL NOT BE ABLE TO START KEY PROGRAMMING.
•
Enter the USER CODE to continue.
•
If the code entered is correct, the first
key is stored.
•
At this point, on the digital display of the
motorcycle, after the automatic restart
of the dynamic presentation screen, a
message will appear with a countdown
of 20 seconds to insert the second key
to be programmed.
•
Set key to "OFF", insert the second key
and set to "ON".
CAUTION
IF YOU DO NOT HAVE A SECOND KEY OR YOU DON'T
WANT TO STORE ONE, THE DIAGNOSTIC TOOL WILL
SHOW AN ERROR SAYING "1 KEY STORED"
Electrical system
ELE SYS - 111