APRILIA TUAREG 660 Service Station Manual page 218

Chassis
•
Insert the retainer plate (3) in the rub-
ber part.
•
Join the rubber part with the footrest by
tightening the two screws (4) to torque.
•
Assemble the footrest opening/closing
components, checking the correct ori-
entation of the plates (5) before insert-
ing the spring (6) and the ball (7).
•
While pressing the side plates, position
the complete footrest on the support
and insert the pin (8).
CHAS - 218
TUAREG 660