TUAREG 660
Removing
In order to remove the front sprocket, having slack-
ened the tension of the final drive chain, proceed
as follows:
•
Unscrew the four fixing screws (1) of
the left frame protection (2) and re-
move it.
•
Turn the retainer (3) outward anti-
clockwise and remove it to disconnect
the gear shift lever tie-rod (4)from the
transmission lever.
•
Unscrew the three fixing screws (5) of
the front sprocket casing (6) taking
care to recover the "T" bushes (7).
•
Remove the front sprocket casing (6)
after having disconnected the breather
pipe (8).
Chassis
CHAS - 195