TUAREG 660
Rear wheelhouse
To remove the rear wheel arch, it is necessary to
first remove the saddle, battery, the battery box,
the fuel tank, the body parts that make up the side
tail fairings, including the side panels and the li-
cense plate holder.
Then proceed as described:
•
Disconnect the fuse boxes (1) from the
mounts
•
Remove the cable guide (2) by discon-
necting main cable harness.
•
Remove the two lower screws (3) tak-
ing care to recover the "T" bushes.
•
Remove the rear screw (4).
Bodywork
BODYW - 299