Braking system
Installing
To install the front brake calliper it must be assem-
bled before positioning it in place.
•
Position the metal plate on the support,
checking for correct orientation.
•
Position the metal plate on the brake
calliper, checking for correct orienta-
tion.
•
Lubricate the rubber grommet as nec-
essary and insert it on the support.
NOTE
CHECK THE CONDITION BEFORE POSITIONING THE
RUBBER GROMMET. IF DETERIORATED OR HAS
CRACKS, REPLACE IT WITH A NEW ONE.
•
Lubricate the rubber grommet as nec-
essary and insert it on the brake callip-
er.
NOTE
CHECK THE CONDITION BEFORE POSITIONING THE
RUBBER GROMMET. IF DETERIORATED OR HAS
CRACKS, REPLACE IT WITH A NEW ONE.
BRAK SYS - 242
TUAREG 660