Unpacking And Inspection; Installation Safety; Electrical Connection Safety - Sungrow Logger1000B User Manual

1 Safety Instructions
1.1

Unpacking and Inspection

• Check all safety signs, warning labels and nameplates on devices.
• The safety signs, warning labels and nameplates must be clearly visible and
cannot be removed or covered before the device is decommissioned.
After receiving the product, check whether the appearance and structural parts of
the device are damaged, and check whether the packing list is consistent with the
actual ordered product. If there are problems with the above inspection items, do
not install the device and contact your distributor first. If the problem persists,
contact SUNGROW in time.
1.2

Installation Safety

Make sure there is no electrical connection before installation.
Make sure to avoid the water and electricity wiring in the wall before drilling.
Improper installation may cause personal injury!
• When moving the product, be aware of the product weight and keep the balance
to prevent it from tilting or falling.
Before operating the product, please check and ensure that tools to be used have
been maintained regularly.
1.3

Electrical Connection Safety

Before electrical connections, please make sure that the product is not damaged.
Otherwise, it may cause danger!
Before electrical connections, please make sure that the product switch and all
switches connected to the product are set to "OFF", otherwise electric shock may
occur!
2
User Manual