Overview; General Information; Current Alarms - Sungrow Logger1000B User Manual

User Manual
After all devices have been added, configure the forwarding service of the Logger1000, to
ensure that the Logger1000 can forward the data to upstream devices. Refer to the chapter
"7.10.6 iSolarCloud"~"7.10.9 Third-party
- - End
7.6

Overview

7.6.1 General Information

Click Overview→General information to enter the corresponding interface.
Shortcut menu
Device setup: support of auto search and add device functions. Click the menu to add,
delete, modify, and view the device or perform auto search operation to search the device to
which address will be automatically allocated. Refer to the chapter
Network management: set Ethernet parameters. Refer to the chapter
Parameter".
Transfer configuration: transfer the data connected by the system to the background. Refer
to the chapter
System maintenance: support of operations such as system upgrade, log export, and
rebooting. Refer to the chapter
PV-plant value
Information such as today yield, total yield, real-time active power, and number of offline
devices can be viewed.
Click the button Exp. to view more information.
Inverter realtime values
Information on the inverter such as state, daily yield, active power, and reactive can be
viewed.

7.6.2 Current Alarms

Click Overview→Current alarms to view the device fault information.
Information such as device name, alarm name, alarm type, alarm time, fault code, and fault
ID can be viewed.
"7.10.6 iSolarCloud"~"7.10.9 Third-party
"7.10.2 System
portal".
portal".
Maintenance".
7 WEB Interface
"7.8.1 Device List".
"7.10.10 Port
37