Remote Maintenance - Sungrow Logger1000B User Manual

User Manual
step 3 Select the type of logs to be exported, and click Confirm.
- - End
7.10.2.3 Rebooting
step 1 Click System→System Maintenance to enter the corresponding interface.
step 2 Click Rebooting to enter the corresponding interface.
step 3 A warning window will pop up, and click Confirm to continue the rebooting operation.
- - End
7.10.2.4 Reset all setting
step 1 Click System→System Maintenance to enter the corresponding interface.
step 2 Click Reset All Settings to enter the corresponding interface.
step 3 A warning window will pop up, and click Confirm to continue the reset all settings operation.
- - End
Restoring the factory settings refers to restoring all modified settings to the factory
state and will not clear the data.

7.10.3 Remote Maintenance

step 1 Click System→Remote Maintenance to enter the corresponding interface.
table 7-3 Parameter description
Remote maintenance switch
state
Disabled
Enable
step 2 In case the remote maintenance switch is in the Enable state, the remote service address
needs to be set.
• Users in mainland China select Chinese Server,
• Users in Europe select European Server.
Description
Not allow for remote maintenance on the Logger1000
Allow for remote maintenance on the Logger1000
7 WEB Interface
47