Device Information; Device Maintenance; Device List - Sungrow Logger1000B User Manual

7 WEB Interface
7.7.6.2 Batch setting
step 1 Select a device, click Boot, and a dialog box pops up.
step 2 Click Configure Synchronization.
step 3 Select the desired devices in the pop-up device list, and click Save to achieve batch setting.
step 4 Click Confirm on the pop-up dialog box.
- - End

7.7.7 Device Information

Click Device Monitoring→Device Information to view the corresponding information.
Parameter information such as device S/N, device model, and rated active power can be
viewed.
7.8

Device Maintenance

7.8.1 Device List

The function module Device list is used for managing devices connected to the Logger1000
and configuring addresses for these devices. Devices can be automatically searched and
added.
7.8.1.1 Auto search
The Auto Search function is used for SUNGROW string inverter to which addresses will be
automatically allocated.
step 1 Click Device→Device List to enter the corresponding interface.
step 2 Click the button Auto Search, and the corresponding window pops up.Select an interface
type, and click Search.
step 3 After that, corresponding devices will be displayed.
- - End
Inverters without the SN do not support the automatic search function and device
adding function.
Automatic address allocation pops up only when there is an actual address
confrontation.
If one of the serial ports needs to enable the access of EyeW485, see
RS485"
for eligible devices with the array number and country/region.
40
for specific operations. After the port type is selected, users can search
User Manual
"7.10.10.1