Sungrow Logger1000B User Manual page 41

User Manual
Step
No.
Set the devices connected to the Logger1000 through the
device management function. If the device connected for the
first time is SUNGROW string inverter, use
List"
7
automatically allocated. For devices of other types, connect
them to the Logger1000 by referring to
the devices of other types, the communication address needs
to be preset.
Enable the DHCP service of the router, so that the Logger1000
8
automatically obtains the IP address via the DHCP function.
Set the iSolarCloud address if data needs to be uploaded to
cloud server.
The default iSolarCloud station is "China Station". Users in
9
mainland China access the "China Station", users in Europe
access the "Europe Station",users in Australia access the "-
Australian Server", and users in other regions access the "-
International station".
Check the data of SUNGROW string inverter for correctness on
10
the real-time information interface.
Create new plant via the iSolarCloud App and check the
11
iSolarCloud data for correctness.
The auto search function is available for SUNGROW string inverters whose
addresses are automatically allocated.
Devices of other types, such as Smart Energy Meter and transformer, can be
connected to Logger1000 via the adding device function.
Addresses of the device connected to the same communication port should be
different from each other.
Save the settings after operation, and otherwise the settings will not take effect.
function to search the device whose address will be
"7.8.1 Device
"7.8.1 Device List". For
6 Commissioning
Result
□
□
□
□
□
31