Data Related To Safety Standards; Decommissioning; Product Specification - INVT Goodrive20-EU Series Operation Manual

Goodrive20-EU Series VFD
3. Perform commissioning on the machine in jogging mode and check whether the
rotating direction of the motor meets the requirement. If no, exchange the wires of any
two phases of the motor to change the running direction of the motor.
4. Set all control parameters and then run the machine.

2.2 Data related to safety standards

IEC/EN 61508 (type A system)
SIL PFH HFT
-10
2 8.73*10
-10
3 8.53*10
* PTI: proof test interval.
** According to the categorization defined in EN ISO 13849-1.

2.3 Decommissioning

Before decommissioning any safety system from active service:
 Evaluate the impact of decommissioning on adjacent operating units and facilities or other
field services.
 Conduct a proper review and obtain required authorization.
 Ensure that the safety functions remain appropriate during decommissioning activities.
 Implement appropriate change management procedures for all decommissioning activities.

2.4 Product specification

Function
Power input
Input frequency (Hz)
Power output
Output frequency (Hz)
Technical
control
Adjustable-speed ratio Asynchronous motor 1:100 (SVC)
feature
Speed control accuracy ± 0.2% (SVC)
λdu
SFF
1 71.23% 1.79*10
1 99.38% 0.64*10
Input voltage (V)
Allowable voltage
fluctuation
Input current (A)
Output voltage (V)
Output current (A)
Output power (kW)
Control mode
Motor
λdd
PTI*
-9
0 1 year
3
-10 -9
3.3*10
months
AC 1PH 200V–240V, rated voltage: 230V
AC 3PH 200V–240V, rated voltage: 230V
AC 3PH 380V–480V, rated voltage: 400V
-15%–+10%
Refer to section 2.7 "Rated specifications".
50Hz or 60Hz; allowed range: 47–63Hz
0–input voltage
Refer to section 2.7 "Rated specifications".
Refer to section 2.7 "Rated specifications".
0–400Hz
SVPWM, SVC
Asynchronous motor
-7-
Product overview
ISO 13849**
PL CCF MTTFd
343.76
d 57
year
207.04
e 57 98.09%
year
Specification
DC Category
60% 3
3