Emerson Rosemount 2230 Reference Manual page 28

Installation
March 2021
Pipe mounting
The Rosemount 2230 Graphical Field Display can be mounted on pipes ranging from a
diameter of 33 mm to 60 mm by using an optional mounting kit supplied by Emerson
Automation Solutions/Rosemount Tank Gauging.
Procedure
1. Attach the bracket to the pipe.
2. Tighten the nuts. Use moderate torque to ensure that the bracket does not break.
3. Attach the display to the bracket by sliding it from the top downwards.
4. Secure the display to the bracket by tightening the locking screw.
28
Ensure that the Rosemount 2230 is placed in a direction so that the display is clearly
visible and wiring can be properly connected.
A
C
A. 1 - 2 inches
B. 4 nuts and washers
C. Bracket
A
A. Locking screw
B. Bracket
B
B
Reference Manual
00809-0100-2230
Reference Manual