Emerson Rosemount 2230 Reference Manual page 162

™
F Fieldbus Block Information
OUNDATION
March 2021
Table C-1: Resource Block Parameters
Index Parameter
Number
82 FAILED_ENABLE
83 FAILED_MASK
84 FAILED_ACTIVE
85 MAINT_PRI
86 MAINT_ENABLE
87 MAINT_MASK
88 MAINT_ACTIVE
89 ADVISE_PRI
90 ADVISE_ENABLE
91 ADVISE_MASK
92 ADVISE_ACTIVE
162
(continued)
Description
Enabled FAILED_ALM alarm conditions. Corresponds bit for bit to the
FAILED_ACTIVE. A bit on means that the corresponding alarm condition
is enabled and will be detected. A bit off means the corresponding alarm
condition is disabled and will not be detected.
This parameter is the Read Only copy of FD_FAIL_MAP.
Mask of FAILED_ALM. Corresponds bit of bit to FAILED_ACTIVE. A bit on
means that the condition is masked out from alarming.
This parameter is the Read Only copy of FD_FAIL_MASK.
Enumerated list of failure conditions within a device. All open bits are
free to be used as appropriate for each specific device.
This parameter is the Read Only copy of FD_FAIL_ACTIVE.
Designates the alarming priority of the MAINT_ALM
Enabled MAINT_ALM alarm conditions. Corresponds bit for bit to the
MAINT_ACTIVE. A bit on means that the corresponding alarm condition
is enabled and will be detected. A bit off means the corresponding alarm
condition is disabled and will not be detected.
This parameter is the Read Only copy of FD_OFFSPEC_MAP.
Mask of MAINT_ALM. Corresponds bit of bit to MAINT_ACTIVE. A bit on
means that the condition is masked out from alarming.
This parameter is the Read Only copy of FD_OFFSPEC_MASK.
Enumerated list of maintenance conditions within a device.
This parameter is the Read Only copy of FD_OFFSPEC_ACTIVE.
Designates the alarming priority of the ADVISE_ALM.
Enabled ADVISE_ALM alarm conditions. Corresponds bit for bit to the
ADVISE_ACTIVE. A bit on means that the corresponding alarm condition
is enabled and will be detected. A bit off means the corresponding alarm
condition is disabled and will not be detected.
This parameter is the Read Only copy of FD_MAINT_MASK &
FD_CHECK_MASK.
Mask of ADVISE_ALM. Corresponds bit by bit to ADVISE_ACTIVE. A bit on
means that the condition is masked out from alarming. This parameter is
the Read Only copy of FD_MAINT_MASK & FD_CHECK_MASK.
Enumerated list of advisory conditions within a device. All open bits are
free to be used as appropriate for each specific device.
This parameter is the Read Only copy of FD_MAINT_ACTIVE &
FD_CHECK_ACTIVE.
Reference Manual
00809-0100-2230
Reference Manual