Emerson Rosemount 2230 Reference Manual page 52

Configuration and operation
March 2021
Select variables using a configuration tool
Variables to present in the View Mode can also be configured by using the TankMaster
WinSetup configuration program, a 475 Field Communicator, the AMS Device Manager or
other host system. For more information see the Rosemount Tank Gauging
Configuration Manual
52
Table 4-2: Selectable Variables
Variable Description
Level Product level in the displayed tank
Ullage Ullage is the distance from the Tank Reference Point to the
product surface
Level Rate How the product in the tank moves when emptying or filling the
tank
Signal Strength The signal strength of the radar level gauge
Free Water Level The level of water in the bottom of the tank. Available when a
water level sensor is connected to the tank
Vapor Pressure Measured vapor pressure
Liquid Pressure Measured liquid pressure
Air Pressure Measured air pressure in the tank
Ambient Temperature Air temperature outside the tank
Vapor Temperature Temperature of vapor inside the tank
Liquid Average Averagte temperature of the product in the tank
Temperature
Tank Temperature Average temperature of the product and vapor in the tank
Temperature 1 To 16 Individual temperature of each selected temperature spot element
Observed Density Calculated density based on the product level and pressure
Reference Density Reference density as specified with the configuration tool
Flow rate Measured flow rate
Tot Obs Volume Total observed product volume in the tank
User defined 1 t o5 Custom measurement variable
Middle Pressure Measured pressure from transmitter P2
Tank Height Tank Reference Height
ΔLevel Difference between two product levels
Custom TMV 1-10 Custom tank variables
Level % Product level presented in a bargraph
Ullage % Ullage value presented in a bargraph
(Document no. 00809-0300-5100).
Reference Manual
00809-0100-2230
System
Reference Manual