Emerson Rosemount 2230 Reference Manual page 106

Service and troubleshooting
March 2021
Table 5-4: Troubleshooting Chart for Tankbus Related Problems
Symptom
No communication
with the Rosemount
2230 Graphical Field
Display
106
Possible cause
Legacy system: incorrect
configuration of 2160 Field
Communication Unit (FCU)
Incorrect configuration of
tank database in
Rosemount 2410 Tank Hub
Connection to Rosemount
2410 Tank Hub
Configuration of
communication protocol
Reference Manual
00809-0100-2230
(continued)
Action
• Check the Modbus communication
address specified for the ATD device that
represents the Rosemount 2230 display
in the 2160 FCU Slave Database. For the
single tank version, the ATD address is
equal to the Modbus address of the
Rosemount 2410 Tank Hub itself.
• Check configuration of communication
parameters for the FCU Fieldbus ports
• Check that the correct communication
channel is selected
• See the Rosemount Tank Gauging
Configuration Manual (Document no.
00809-0300-5100) for more information
on how to configure the 2160 FCU
• Check the Rosemount 2410's tank
database; ensure that the Rosemount
2230 device is available and mapped to
the right tank
• Rosemount 2410 tank database; check
that the ATD Modbus address is equal to
the 2410 Temp Modbus address in the
Rosemount 2460 System Hub's tank
database/2160 Field Communication
Unit's slave database
• See the Rosemount Tank Gauging
Configuration Manual (Document no.
00809-0300-5100) for more information
on how to configure the Rosemount 2410
's tank database
• Check wiring to the Rosemount 2410
Tank Hub
• Check the Rosemount 2410 Tank Hub;
check the Error LED or the integral display
for information
In TankMaster WinSetup:
• Open the Protocols folder and check that
the protocol channel is enabled
• Check the protocol channel configuration
(right-click the protocol channel
MbMaster icon, choose the Properties
option, and check port, parameters,
modem)
System
System
Reference Manual