Emerson Rosemount 2230 Reference Manual page 51

Reference Manual
00809-0100-2230
4.6.2 Variables
In the Select Variables menu
The following options are available:
Tank Pos 1-10
Tk Pos 1, 2, 3...
See Table 4-2
Select variables to be displayed
The Select Variables menu allows you to select variables to be displayed in View Mode.
Option "Tank Pos 1-10" can be used to specify a common set of variables to be used for all
tanks connected to the same Rosemount 2410 Tank Hub. In addition to this you can
configure tanks individually by specifying a unique set of variables for each tank. Note that
the individual configuration will be added to the configuration that is common for all
tanks.
Procedure
1. In View Mode, press Menu → Options → Variables.
2. Use the
3. Press the OK softkey to continue to the Selected Variables list.
4. In the Select Variables list, choose the variables you wish to show in View Mode.
5. When finished, press OK to return to View Mode.
(11) Not available in F
OUNDATION
Rosemount 2230 Graphical Field Display
(11)
, you can choose which variables to present in View Mode.
Configure a common set of variables to be presented for all tanks.
Tank Position refers to the position in the tank database of the
Rosemount 2410 Tank Hub.
Configure variables individually for each tank.
for a list of available variables.
and softkeys to navigate to the desired Tank Position item.
™
Fieldbus systems.
Configuration and operation
March 2021
51