Emerson Rosemount 2230 Reference Manual page 22

Overview
March 2021
Rosemount 5900S Radar Level Gauge, and the Rosemount 2240S Multi-input
Temperature Transmitter can be summarized as follows:
Procedure
1. Install the devices on the appropriate locations.
2. Assign Modbus addresses
3. Verify that the total current consumption of devices connected to the Tankbus does
4. Wire the devices.
5. Install the TankMaster software in the control room PC.
6. Configure the devices by using the TankMaster WinSetup configuration tool as
2.4.1 Start-up in a F
To start up Rosemount Tank Gauging devices in a F
Procedure
1. Prepare the start-up by recording information that will be needed for configuration
2. Connect the field devices, such as the Rosemount 5900S Radar Level Gauge and the
3. Configure the field devices by using AMS Device Manager (or any other F
(4) See the Rosemount Tank Gauging
(5) See the Rosemount 2410 Tank Hub
22
such as the Rosemount 5900S Radar Level Gauge, and for auxiliary tank devices
(ATD) such as the Rosemount 2240S Multi-input Temperature Transmitter. The
Modbus addresses will be stored in the built-in databases of the Rosemount 2410
Tank Hub and the Rosemount 2460 System Hub.
(5)
not exceed 250 mA . In an Emerson Wireless system the maximum current is 200
mA.
a) Connect field devices to the Tankbus.
Note
Devices must be configured in the tank database
Tank Hub in order to be able to communicate on the Tankbus.
b) Connect the Rosemount 2410 Tank Hub to the Rosemount 2460 System
Hub.
c) Connect the Rosemount 2460 System Hub to the control room PC with
TankMaster software. The 2460 may be connected via a Rosemount 2180
Field Bus Modem, or directly via RS 232 or RS 485.
described in the Rosemount Tank Gauging
(Document no. 00809-0300-5100).
OUNDATION
of various field devices as described in the Rosemount Tank Gauging System
Configuration manual. This may for example include tank geometry, antenna type,
number of temperature elements and other configuration parameters.
Rosemount 2240S Multi-input Temperature Transmitter, to the F
Fieldbus network.
Fieldbus host supporting DD4).
System Configuration Manual
Reference Manual
(4)
for the Rosemount 2410 Tank Hub, for level gauges
System Configuration Manual
™
Fieldbus system
OUNDATION
(Document no. 00809-0300-5100) for more information.
(Document No. 00809-0100-2410) for more information.
Reference Manual
00809-0100-2230
(4)(5)
of the Rosemount 2410
Fieldbus system:
OUNDATION
OUNDATION
Reference Manual