5.
Display the refresh parameter setting window and configure the setting as follows.
6.
Write the set parameter to the CPU module of the master station and reset the CPU module, or turn
off and on the power supply.
[Online] [Write to PLC...]
7.
Display the "Parameter Processing of Slave Station" window.
Project window [Parameter] [Network Parameter]
[Ethernet/CC IE/MELSECNET]
"List of stations". [CC IE Field Configuration] [Online] [Parameter Processing of Slave
Station]
8.
Set "Parameter write" for "Method selection".
button
RESET
or Power OFF
ON
CHAPTER 10 PROGRAMMING
button Select an I/O module in
10
219