Mitsubishi Electric NZ2GF2B1-16D User Manual page 169

6.
Click the
7.
Click the button.
8.
The parameter is written to the I/O module.
● Set all the items for the parameter. If any blank exists, the parameter cannot be written to the I/O module.
● To read the parameter from the I/O module, set "Method selection" to "Parameter read" and click the
button.
● When the following message is displayed, take corrective action for the error code in < >. For details on the error code,
refer to the Error Code List ( Page 238, Section 12.2) and the user's manual for the master/local module used.
button and the following window is displayed.
CHAPTER 8 VARIOUS SETTINGS
167
8