Mitsubishi Electric NZ2GF2B1-16D User Manual page 172

12.
Set "Method selection" to "Parameter write".
13.
Set "Write Value". The following are the procedure.
• Click the title cell of "Read Value" to select all the items and copy them.
• Click the title cell of "Write Value" to select all the items and paste the copy.
• Select the items to be changed, and set new values.
14.
Click the
15.
Click the
16.
The parameter is written to the I/O module.
The module parameter setting of the slave station is completed.
17.
Close the "CC IE Field Configuration" window.
[CC IE Field Configuration]  [Close with Reflecting the Setting]
170
button and the following window is displayed.
button.