Loading Usb Drivers To The Service Pc - Respironics BiPAP Service Manual

6.2 Loading USB
Drivers to the Service
REF 1029568 Rev B
Before installing ventilator operating software, USB drivers must be installed
onto the service PC. This is only done once per service PC. The USB drivers are
on software CD P/N 1063919.
PC
1. Insert the software CD (P/N 1063919) into the service PC CD-ROM
drive.
2. Using Windows Explorer to navigate to the CD-ROM drive, then
double-click to display the CD files (Figure 6-5).
3. At Can Windows connect to Windows Update to search for software?
click Yes, this time only then Next.
4. Select Install the Software Automatically (Recommended) then click
Next (Figure 6-6). The Wizard begins searching.
BiPAP Focus Ventilator Service Manual © Respironics, Inc.
Figure 6-5: Files on the CD (P/N 1063919)
Chapter 6
Ventilator Communications
6-5