Top Cover - Respironics BiPAP Service Manual

8.2 Top Cover

REF 1029568 Rev B
Follow these steps to remove the top cover (Figure 8-2, Figure 8-3, and Figure
8-4). Reverse to install.
1. From the underside of the ventilator, remove the screws that hold the
side covers (2 screws on each side cover) to the ventilator and remove
the side covers.
2. Remove the 4 screws that hold the display assembly to the ventilator
(2 screws at either side of the display and 2 screws under the display
assembly).
Screws (x2)
(5 lbf-in., 57 N cm)
Screws (x2)
(5 lbf-in., 57 N cm)
BiPAP Focus Ventilator Service Manual © Respironics, Inc.
Component Removal/Installation
Screws (x2)
(5 lbf-in., 57 N cm)
Side panel
Side panel
Figure 8-2: Bottom Cover
Chapter 8
Display
assembly
Screws (x2)
(8 lbf-in., 90 N cm)
8-3