7.6 System
Calibration
REF 1029568 Rev B
Testing, Calibration, and Performance Verification
Calibration software compares the ventilator real-time clock to service PC time
to determine exactly when an event occurs, Because the system calibration
fails if the times do not match, perform the real-time clock calibration (section
7.5) before you start this calibration procedure.
7.6.1
Downloading System Calibration Software
Follow these steps to download the most current calibration software to the
service PC, then perform the calibration procedure:
1. From the service PC, go to http://my.respironics.com and click on
Service Software (Figure 7-8).
Figure 7-8: Select Service Software
BiPAP Focus Ventilator Service Manual © Respironics, Inc.
Chapter 7
7-11