Blower - Respironics BiPAP Service Manual

8.7 Blower

REF 1029568 Rev B
Follow these steps to remove the Blower (Figure 8-14, Figure 8-15). Reverse
to install.
1. Remove top cover (section 8.2).
2. Remove the user interface PCB (section 8.4).
3. Remove the controller PCB (section 8.5).
Screws (x2)
(5 lbf-in., 57 N cm)
4. Remove the 2 screws that anchor the blower to the muffler.
BiPAP Focus Ventilator Service Manual © Respironics, Inc.
Component Removal/Installation
Blower
Figure 8-14: Blower
Chapter 8
Diffuser
8-13