Omron NX Series User Manual page 86
Io-link system
Hide thumbs
Also See for NX Series:
- User manual (464 pages) ,
- Hardware user manual (222 pages) ,
- Reference manual (116 pages)
Table of Contents
Advertisement
3 Parameter Settings
*6.
Even if the backup function is enabled, the backup data will be restored if restoring data is enabled with the Restora-
tion Setting and the parameter settings for the IO-Link devices are different from the backup data.
*7.
Even if restoring data is enabled, the settings will be backed up if there is no backup data in the IO-Link Master Unit.
*8.
Digital outputs are cleared and IO-Link communications are disabled.
*9.
Digital outputs are held and IO-Link communications are maintained.
*10. Digital input values in SIO (DI) Mode and digital input values for pin 2 are specified separately for each port.
*11. These settings are supported with the unit version 1.1 or later.
3-6
NX/GX-series IO-Link System User's Manual (W570)
Advertisement
Table of Contents
Troubleshooting
