Omron NX Series User Manual page 21

Backing Up the Parameters from the IO-Link Devices to the IO-Link
Master Unit
The parameter settings of the IO-Link devices are not backed up, restored, or verified when the pa-
rameter settings of the IO-Link Master Unit are backed up, restored, or verified to an SD Memory
*1
Card or the Sysmac Studio.
Use the CX-ConfiguratorFDT to load the device parameters and save the device parameters.
*1. For an NY-series Industrial PC, this is a Virtual SD Memory Card.
NX/GX-series IO-Link System User's Manual (W570)
Precautions for Correct Use
19