9 Example of Operations for IO-Link Systems
9-1
Assumed Configuration
This section describes the following setting and programming examples for the assumed configura-
tion.
• Reading Sensor Connection Status and Sensor Errors
You can read the following status: I/O cable breaks, short-circuit status, and Sensor errors.
• Reading Input Data from Sensors
You can read the following from a Photoelectric Sensor: control output status, unstable detection
status, and detected light level.
You can read the following from a Color Mark Sensor: control output status, unstable detection sta-
tus, and amount of indecent light.
• Sensor Setting Operations
You can set the sensitivity level of a Photoelectric Sensor.
• Reading Sensor Status
You can read the operating times of Photoelectric Sensors and Color Mark Sensors.
9-2
NX/GX-series IO-Link System User's Manual (W570)