Application Procedure - Omron NX Series User Manual

Command
Result
Precautions for Correct Use
• When you use the EtherNet/IP Coupler Unit with unit version 1.1 or earlier, you cannot use
communications instructions for the IO-Link Master Unit. Use the CX-ConfiguratorFDT to
clear the backup data. Use the EtherNet/IP Coupler Unit with unit version 1.2 or later to use a
communications instruction.
• The backup data in the IO-Link Master Unit is not cleared by the clear all memory function for
NX Units.
7-6-6

Application Procedure

For information on how to back up and restore parameter settings in IO-Link devices, refer to
10-3-2 Replacing the IO-Link Master Unit or IO-Link Devices on page 10-57.
NX/GX-series IO-Link System User's Manual (W570)
Clearing executed.
00 hex 01 hex
FFFF hex during execution.
7 Functions of IO-Link Master Units
Clearing executed.
00 hex 01 hex
FFFF hex during execution.
0000 or 0001 hex
7
7-25