Omron NX Series User Manual page 176

8 Applicable Support Software for IO-Link Systems
Precautions for Correct Use
If the IODD file for the set IO-Link devices is not installed in the computer, the IO-Link device
name in the device registration area will be displayed as an ID in the following format:
Vendor ID_Device ID_IO-Link revision (Decimal representation of IO-Link revision)
Example: 612_131087_1.1(17)
To display the correct device name, install an IODD file with the corresponding vendor ID, de-
vice ID, and IO-Link revision. To install an IODD file, right-click in the device registration area
and select Install IODD File.
Setting Parameter and Editing I/O Data Size for the IO-Link Master
Unit in the IO-Link Master Simple Settings Tab Page
l NX-type IO-Link Master Units
1
In the device registration area, select the port to which to connect the IO-Link device. Then, in
the Toolbox, double-click the IO-Link device, or right-click the IO-Link device and select Insert.
You can also register an IO-Link device by dragging and dropping it to a port in the device reg-
istration area.
8-18
NX/GX-series IO-Link System User's Manual (W570)