Io-Link Process Input Data From E3S Color Mark Sensors, And I/O Map - Omron NX Series User Manual

9 Example of Operations for IO-Link Systems
7
Major error Minor error
I/O Map (Example for an NX-type IO-Link Master Unit)
I/O port
qNX-ILM400
qPort1_Input_Data_01
[0]
[1]
Additional Information
The table below shows the resulting I/O Map when you use the IO-Link Master Simple Settings
to generate I/O ports and then automatically generate variable names.
qNX-ILM400
qPort1_Input_Data_01
Port1 Detection Level
Port1 Control Output 1
Port1 Control Output 2
Port1 Instability Alarm (Non-
Light Receiving)
Port1 Instability Alarm (Light
Receiving)
Port1 Warning
Port1 Error
9-5-3
IO-Link Process Input Data from E3S Color Mark Sensors, and
I/O Map
The allocation of the IO-Link process input data and the I/O Map in the E3S Color Mark Sensor are as
described below.
Allocation of Process Input Data
PD0 ---
(Not
used.)
9-8
6 5
Not used Instability
(0) Alarm
(Non-Light
Receiving)
R
Data type
W
R ARRAY[0..1]OF BYTE
R BYTE
R BYTE
I/O port
7 6 5
--- ---
(Not (Not
used.) used.)
PD1
4 3
Instability Not used
Alarm (0)
(Light Re-
ceiving)
Variable name
IO_LinkData1
IO_LinkData1 [0]
IO_LinkData1 [1]
R
Data type
W
R ARRAY[0..1]OF
BYTE
R USINT
R BOOL
R BOOL
R BOOL
R BOOL
R BOOL
R BOOL
Bit
4 3
--- ---
(Not (Not
used.) used.)
NX/GX-series IO-Link System User's Manual (W570)
2 1
Sensor out- Sensor out-
put 2 put 1
Variable comment
PD0
PD1
Variable name
N1_Port1_Input_Data01
N1_Port1_Detection_Level
N1_Port1_Control_Output_1
N1_Port1_Control_Output_2
N1_Port1_Instabili-
ty_Alarm_Non_Light_Receiving_0
N1_Port1_Instabili-
ty_Alarm_Light_Receiving_0
N1_Port1_Warning
N1_Port1_Error
2 1
B light G light R light
emission emission emission
0
0