Omron NX Series User Manual page 262

10 Troubleshooting for IO-Link Systems
Event name Error-level Device Event
Meaning An error-level event occurred in the IO-Link device.
Source Depends on where the Support
Software is connected and the
system configuration.
Error attrib- Level
utes
Recovery
Effects User program
System-de- Variable
fined varia-
None
bles
Cause and Assumed cause
correction
Use CX-ConfiguratorFDT to con-
firm the IO-Link event code of the
IO-Link device.
Attached in- Attached information 1: Port where error occurred
formation
Precautions/ None
Remarks
10-40
Source details NX Unit
Observation
Reset error. If the error cannot be recovered, restart the NX Unit because the error is
continued in the IO-Link device.
Continues. Operation
Data type
---
Correction
Check the correction from the IO-
Link event code of the IO-Link
device.
0001 hex: Port 1
0002 hex: Port 2
0003 hex: Port 3
0004 hex: Port 4
Event code 848C0000 hex
Detection tim-
ing
Log category System
Operation will continue.
It is possible that the data received from the IO-
Link device is not correct.
Name
---
Prevention
Check the prevention measures
from the IO-Link event code of
the IO-Link device.
NX/GX-series IO-Link System User's Manual (W570)
Continuously