Omron NX Series User Manual page 175

The IO-Link Master Simple Settings Tab Page is displayed.
IO-Link Master Simple Settings Tab Page
The IO-Link Master Simple Settings Tab Page allows you to perform parameter setting and I/O data
size editing at once for the IO-Link Master Unit.
(d)
(a) Device registration area
(b) IO-Link port setting area
(c) Toolbox
(d) Process data structure
pane
(e) I/O Map display method
selection
(f) OK Button
Cancel Button
*1. You can select this option for NJ/NX-series CPU Units with unit version 1.40 or later.
NX/GX-series IO-Link System User's Manual (W570)
8 Applicable Support Software for IO-Link Systems
(a)
(e)
Item
Register the IO-Link devices to connect to the IO-Link Master Unit.
The settings of the port selected in the device registration area are dis-
played.
A list of IO-Link devices are displayed.
You can add an IO-Link device to any port position by dragging and
dropping it from this list to the device registration area.
The process data structure of the selected IO-Link device is displayed.
Select how to display IO-Link device ports in the I/O Map.
•
Generate process data structure of the IO-Link device: Displays ports
according to the process data structure.
•
Byte array (reset to default): Displays ports as byte arrays.
Use this button to return to the previous tab page with the settings
saved.
Use this button to return to the previous tab page with the settings dis-
carded.
(b) (c)
(f)
Description
*1
8
8-17