Omron NX Series User Manual page 287

Step
5 Programming
Cyclic Communications
Message Communica-
tions
6 Turning ON the Power
Supply and Going Online
with the EtherCAT Soft-
ware Application from the
Other Company
7 Downloading the Network
Configuration Information
and User Program to the
CPU Unit
8 Parameter Settings for IO-
Link Devices (as Required)
9 Downloading Parameter
Settings to IO-Link Devi-
ces (as Required)
10 Checking the Indicators on
the IO-Link Master Unit
and the IO-Link Devices
11 Checking the Error Status
of the IO-Link Master Unit
and the IO-Link Devices
*1. The default data size for each IO-Link device is 2 input bytes or 2 output bytes. The maximum data size for each de-
vice is 32 bytes.
For example, for OMRON IO-Link devices such as the E2E and E3Z, the default values can be used, and no additional
PDO entries are necessary.
NX/GX-series IO-Link System User's Manual (W570)
Contents
Use the software applica-
tion from the other compa-
ny to write the program-
ming for the I/O data
(using the Input Data
Enabled Flag as an input
condition).
Program SDO communica-
tions instructions for the ob-
jects in the IO-Link Master
Units and the IO-Link devi-
ces.
Turn ON the power supply
to the entire system and
connect the
EtherCAT software applica-
tion from the other compa-
ny.
---
If the default values are ac-
ceptable or if you set the
parameters with the actual
devices, you do not need to
change any settings.
Same as above.
---
---
EtherCAT software appli-
cation from the other
company
Use the EtherCAT software
application from the other
company.
Use the EtherCAT software
application from the other
company.
Use the EtherCAT software
application from the other
company.
Use the EtherCAT software
application from the other
company.
---
---
---
---
Appendices
SDO communications
instructions used for
settings
---
---
---
---
Use the method described
in step 9.
(Use SDO communica-
tions instructions from the
controller from the other
company to make settings
through gateway objects
for IO-Link devices con-
nected to the GX-type IO-
Link Master Unit,
or
use a commercially-avail-
able IO-Link USB master
to make settings from CX-
ConfiguratorFDT.)
---
---
A-5
A