Omron NX Series User Manual page 84

3 Parameter Settings
Setting (= object
name)
IO-Link Device ID The type of IO-Link de-
Device vice.
Configu-
Vendor ID The vendor ID of the
ration
IO-Link device.
*1
Settings
Serial No. The serial number of
the IO-Link device.
IO-Link The IO-Link revision of
Revi- the IO-Link device.
Set the major revision
*2
sion
in the 4 upper bits, and
the minor revision in the
4 lower bits.
IO-Link The size (in bytes) of
Input Da- the process input data
from the IO-Link device.
*4
ta Size
IO-Link The size (in bytes) of
Output the process output data
Data to the IO-Link device.
*5
Size
Master Set the communica-
Control tions mode for each
Commu- port.
nications
Mode
Setting
Backup Setting Make this setting to
back up the parameter
settings of the IO-Link
devices in the IO-Link
Master Unit.
Specify whether to ena-
ble or disable backup
for each port.
Restoration Setting Make this setting to re-
store the parameter
settings of the IO-Link
devices from the IO-
Link Master Unit.
Specify whether to ena-
ble or disable restora-
tion for each port.
3-4
Description Default
00000000
hex
00000000
hex
---
00 hex
02 hex (2
bytes)
02 hex (2
bytes)
03 hex:
IO-Link
Mode
00 hex
00 hex
NX-type IO-Link
Master Unit
Setting range
Index
00000000 to 5006 to
00FFFFFF hex 5009
hex
00000000 to
0000FFFF hex
16 characters
max.
*3
00 to FF hex
00 to 20 hex (0 to
32 bytes)
00 to 20 hex (0 to
32 bytes)
00 to 03 hex
00 hex: Disable
Port
01 hex: SIO (DI)
Mode
02 hex: SIO (DO)
Mode
03 hex: IO-Link
Mode
00 to 01 hex 5002
00 hex: Disables hex
backup
01 hex: Enables
*6
backup
00 to 01 hex 5003
00 hex: Disables hex
restoration
01 hex: Enables
*7
restoration
NX/GX-series IO-Link System User's Manual (W570)
GX-type IO-Link
Master Unit
Subin- Subin-
Index
dex dex
01 hex 80*0 04 hex
hex
*: 0 to 7
02 hex 05 hex
05 hex 80*1 None
hex
*: 0 to 7
06 hex 80*0 20 hex
hex
*: 0 to 7
09 hex 24 hex
0A hex 25 hex
0B hex 28 hex
01 to 3012 01 to
04 hex hex 08 hex
01 to 3013 01 to
04 hex hex 08 hex