Omron NX Series User Manual page 188

8 Applicable Support Software for IO-Link Systems
Note 2. You can right-click OMRON EtherNet/IP and select Scan - Life List to create the configura-
Note 3. You can right-click NX CPU Unit Bus and select Scan - Life List to create the configuration
• Connecting the CX-ConfiguratorFDT to the EtherNet/IP
1) Right-click OMRON EtherNet/IP and select Scan - Create Network.
The downstream network configuration is created automatically.
2) Follow the message displayed on the CX-ConfiguratorFDT.
Note You can right-click OMRON EtherNet/IP and select Scan - Life List to create the configuration of
EtherNet/IP slaves (NX-EIC Coupler) connected to EtherNet/IP.
• Connecting the CX-ConfiguratorFDT to the EtherCAT Coupler Unit or EtherNet/IP Coupler
Unit
1) Right-click NX Coupler USB and select Scan - Create Network.
The downstream network configuration is created automatically.
2) Follow the message displayed on the CX-ConfiguratorFDT.
Note You can right-click NX Coupler USB and select Scan - Life List to create the configuration of NX
Units (NX-ILM400) connected to the NX-series Communications Coupler Unit.
Additional Information
If the IO-Link device that is detected by an automatic network configuration creation has the
IODD files with more than one version, you can click the Change Device Type Button in the
Life List Window to change the version.
The following figure is an example that clicks the Yes Button to change the version of IODD
files that is used in the detected IO-Link device from Ver.1.011 to Ver.1.10.
You can also select NX-ECC Coupler, GX-ILM08C, NX-EIC Coupler, or NX-ILM400 to automati-
cally create the downstream network configuration in the same way.
(The following is an example of the EtherCAT network configuration.)
8-30
tion of EtherNet/IP slaves (NX-EIC Coupler) connected to the built-in EtherNet/IP port of the
NJ/NX-series CPU Unit, NY-series Industrial PC, or CJ-series PLC or to the EtherNet/IP Unit.
of NX Units (NX-ILM400) connected to the NX bus of a CPU Unit.
NX/GX-series IO-Link System User's Manual (W570)