Module Configuration Screen - 3Com LINKBUILDER 3C18500 User Manual

Module Configuration Screen

The Module Configuration screen lists the following data read from the
selected module:
slot number.
module type.
service type.
module status.
typical power requirement.
hardware version.
software version (if any).
This is a read-only screen. This information is transferred to NVRAM.
Thereafter when you exchange a module, the software checks the new
module's data against that in NVRAM. There are two possibilities.
The module is of the same variety as that removed and the parameters,
set for the previous module by the manager, are retained.
The module is a different variety and the default parameters are
applied.
Figure 5-23 Module Configuration Screen
DUA1850-0AAA05
MODULE CONFIGURATION
Module Management
FACILITY TABLE CANCEL
5-33