Remote Poll - 3Com LINKBUILDER 3C18500 User Manual

Remote Poll

The Remote Poll screen allows you to see if a remote device is
responding, by sending a single frame to the device. To display the
screen, select the REMOTE POLL on the Main Menu screen.
Figure 5-21 Remote Poll Screen
Target Address
polled.
Round Trip Time
time the last frame was sent to the target device and the time a
response was received by the management module. If set, the
remaining time-to-live will be displayed also. If there is no response
within a few seconds, 'no reply' is shown.
The management module can be configured to automatically poll
several devices at regular intervals. This facility is only available via
SNMP management.
DUA1850-0AAA05
POLL CANCEL
Enter the IP or IPX address of the device to be
This is the interval in milli-seconds between the
Remote Poll 5-31