Automatic Mouth Of The Cbm Stage Hitch; Modular System Of Hitches For Trailers And Semi-Trailers; Swinging Draw-Bar Console Module - Zetor PROXIMA POWER Z90 2012 Operator's Manual

AUTOMATIC MOUTH OF THE CBM
STAGE HITCH
When the lever (1) is moved in the direc-
tion of the arrow (a), the pin (2) is re-
tracted to the upper position, which is
signalled by the extended indicator (3),
see fig. (A).
When the mouth gets onto the shaft lug,
the pin will automatically slide into the
lug of the connected trailer.
lower the hitch pin (2) manually by mov-
ing the lever (1) in the arrow (b) direc-
tion. The insertion of the pin is signalled
by the retracted indicator (3), see fig.
(B).
After the attachment of the trailer
you must always check whether
the indicator (3) is retracted in
accordance with fig. (B).
TRANSPORTATION
E304
MODULAR SYSTEM OF HITCHES FOR
TRAILERS AND SEMI-TRAILERS
Module types:
Fig. (B) - Swinging draw-bar console
Fig. (C) - Swinging draw-bar console
with a fixed pin
Fig. (D) - Console with a ø 80 ball
Disassembly, fig. (A):
1. Remove the locking screw (1).
You can
2. Secure the module against sinking,
release and disassemble the pins (2).
3. Slide the module out of the console
downwards.
Do the assembly in the reverse order.
E305
SWINGING DRAW-BAR CONSOLE
MODULE
The swinging draw-bar console module
is located in the stage hitch console.
SWINGING DRAW-BAR
Disassembly:
1.
2.
Do the assembly in the reverse order.
91
Release and remove the pins (1).
Slide the swinging draw-bar out in
the arrow direction.
E306