Height Adjustment And Disassembly Of The Cbm Stage Hitch; Automatic Mouth Of The Cbm Stage Hitch - Zetor Proxima CL 80 Operator's Manual

Height adjustment and disassembly of the CBM stage hitch

A - Multi-level hitch bracket
B - The hitch (B) can be adjusted in the range of holes 3-8 see Figure (A)
C - The hitch (C) can be adjusted in the range of holes 3-8 see Figure (A)
D - The hitch (D) can be adjusted in the range of holes 4-8 see Figure (A)
E - The hitch (E) can be adjusted in the range of holes 7-8 see Figure (A)
By moving the control lever in the arrow direction to
position (1) you will release the lever and by moving it
subsequently to position (2) you will retract the locking
pins (3). Now, the stage hitch is released and you can
adjust its height or disassemble it. When you release the
lever from position (2), the locking pins (3) will extend and
the lever will automatically return to the initial position.

Automatic mouth of the CBM stage hitch

When the lever (1) is moved in the direction of the arrow
(a), the pin (2) is retracted to the upper position, which is
signalled by the extended indicator (3), see fig. (A). When
the mouth gets onto the shaft lug, the pin will automatically
slide into the lug of the connected trailer. You can lower
the hitch pin (2) manually by moving the lever (1) in the
arrow (b) direction. The insertion of the pin is signalled by
the retracted indicator (3), see fig. (B).
After the attachment of the trailer you must
always check whether the indicator (3) is retracted in
accordance with fig. (B).
92
TRANSPORT USE
závěsy_2
PCLPN049
PCLPN050