Maintenance Instruction Of Dry Air Filter; Main Air Filter Element Regeneration; Replacing Dry Filter Locking Element - Zetor Major 80 Operator's Manual

MAINTENANCE INSTRUCTION OF
DRY AIR FILTER
Do air filter maintenance accordingly:
1. heave the front bonnet
2. release the clamps of air filter lid
(marked with arrows)
3. remove air filter lid (1)
MAINTENANCE INSTRUCTIONS
X712
MAIN AIR FILTER ELEMENT
REGENERATION
 pull to remove the main dry filter ele-
ment (2)
If main element is not damaged (there
must not be dust on the internal side of
the element) regenerate by blowing with
compressed air from the internal side of
the element.
Main element can be regenerated this
way 3 times maximum. Element must be
replaced once a year.
124
G713
REPLACING DRY FILTER LOCKING
ELEMENT
 remove dry filter locking element (3)
with a pull
Locking element cannot be re-
generated. It must be always re-
placed in these cases:
- when damaging main element
- after 5 maintenances of air filter
- at least once in two years
QQQ_G714