Table of Contents
Advertisement
Display - service menu
Entry to service menu:
You will enter the service menu by a longer pressing of (A)
button.
The selection of items to be done by (B) and (C) buttons.
The selected item is marked by an arrow (1).
Exit from service menu:
By buttons (B) and (C), select an item EXIT and press (A)
button.
Service menu
1 - Failures history, for servicing purposes
2 - Machined area
3 - Calibration
4 - Language selection
5 - Exit service menu
Display - setting language mutation
Enter the service menu:
Select the item LANGUAGE by (B) and (C) buttons and
press button (A).
Select language mutation by buttons (B) an (C) and by
one by one presses of button (A) available language
mutations will be one by one displayed. When achieving
the desired language mutation, leave the service menu.
Select EXIT item by using (B) and (C) buttons and press
(A) button.
Dashboard is switched to a selected language mutation.
If you want to change metric units to Anglo-
Saxon, select language mutation ENG. IMP.
Display - machined area
Machined area displays machined area in hectares in the
main displaying array, in the secondary displaying array
mean in hectares per hour.
It is necessary to set the width of the machined
area (i.e. working width of the tools) for the correct
calculation of machined area.
ACQUAINTANCE WITH THE TRACTOR
39
39
FHD14N003
FHD14N028
FHD14N004
FHD14N030
Advertisement
Table of Contents
