Rear Pto Shaft Revolutions Preselection Lever; Standard And Economical Independent Revolutions Of Rear Pto Shaft - Zetor FORTERRA HSX 120 Operator's Manual

Rear PTO shaft revolutions preselection lever

The tractor can be equipped with one of two PTO shaft speed selection systems. The system used for the
specific tractor is marked on the sticker located at the rear PTO shaft speed lever.
1. Standard and economical independent rear PTO shaft Speed - Label (1)
2. Dependent and independent rear PTO shaft speed - sticker (2)
The rear PTO shaft speed lever (3) is located on the right side of the driver's seat.
The center (neutral) position of the rear PTO shaft speed selector lever is indicated by the N (4) symbol on
the dashboard display.
Independent rear PTO shaft speed - revolutions speed is dependent on engine revolutions.
Dependent rear PTO shaft speed - the number and the meaning of the revolutions speed is dependent on
the gear and the position of the reversing lever.
Shift the rear PTO shaft gear shift only when the rear PTO shaft is stopped and the clutch
pedal is depressed.

Standard and economical independent revolutions of rear PTO shaft

The system used for the specific tractor is marked on the sticker located at the rear PTO shaft speed lever.
This system only has independent rear PTO shaft revolutions speed.
A - Standard PTO shaft speeds are shifted
N - Neutral position (Rear PTO shaft terminal can be rotated freely.)
B - Economic PTO shaft speeds are shifted
When the standard PTO shaft speed is selected (A), the rear PTO shaft speed selector can be set to 540 or
1,000 revolutions of the rear PTO shaft.
When the economic PTO shaft speed (B) is selected, the rear PTO shaft speed selector can be set to 540E
or 1,000E revolutions of the rear PTO shaft.
The lever is located on the right side of the driver's seat. Raise the ring in the direction of the arrow (C) to
move the lever.
The selected economic PTO shaft speed is indicated by the E symbol displaying behind the selected PTO
shaft speed in the dashboard display.
DRIVE OF AGRICULTURAL MACHINERY
FHSX18N005
FHSX18N006
133