Control Elements Of Pto Shafts; The Rear Pto Shaft - The Gear Shift Lever Of Dependent And Independent Revolutions; The Rear Pto Shaft - The Gear Shift Lever Of Revolutions Of The Pto Shaft - Zetor Proxima CL 80 Operator's Manual

PTO DRIVE OF AGRICULTURAL MACHINES

Control elements of PTO shafts

The rear PTO shaft - the gear shift lever of dependent and independent revolutions

P18N016
Shifting is performed when the tractor is idling and when the clutch pedal is pressed.
a - independent revolutions of the PTO shaft
(the number of revolutions depends on the number of engine revolutions)
n - neutral position
it is used to facilitate the connection of the cardan shaft of the agricultural machine. The end piece of the rear
PTO shaft can be freely rotated.
b - dependent revolutions of the PTO shaft
(number and sense of revolutions depends on the shifted gear and position of the reversing lever)
The neutral position of the gear shift lever of dependent and independent revolutions is indicated with the
symbol N (1) on the display of the instrument panel.

The rear PTO shaft - the gear shift lever of revolutions of the PTO shaft

The tractor can be equipped with the double combination
of revolutions of the rear PTO shaft:
540/540E or 540/1000 revolutions
a - 1000 (540E) rpm
n - neutral position
b - 540 rpm
Shifting is performed when the tractor is not going and
when the clutch pedal is pressed by pulling of pressing the
shift lever of revolutions.
PGPPN162
The combination of revolutions of the rear PTO shaft of the tractor is shown on the label on
the left side of the tractor cabin front window.
100