Hyundai r35z-7 Workshop Manual page 402

2. REMOVAL AND INSTALL
1 1 )
BUCKET ASSEMBLY
(1) Removal
Lower the work equipment completely to
ground with back of bucket facing down.
Remove nut(1), bolt(2) and draw out the
pin(4).
Remove nut(1), bolt(2) and draw out the
pin(3) then remove the bucket assembly.
Weight : 80kg(180lb)
(2) Install
Carry out installation in the reverse order
to removal.
When aligning the mounting position of
the pin, do not insert your fingers in the
pin hole.
Adjust the bucket clearance.
For detail, see operator's manual.
2
1
7-142
R35Z77AT02
R35Z77AT03
R35Z77AT04
R35Z77AT05