Hyundai r35z-7 Workshop Manual page 250

5. TURNING JOINT
Part name
Sliding surface with
sealing sections.
Sliding surface
between body and
stem other than
Body,
sealing section.
Stem
Sliding surface
with thrust plate.
Sliding surface
with thrust plate.
Cover
-
Seal set
-
-
Maintenance standards
Plating worn or peeled due to seizure or contamination.
Worn abnormality or damaged more than 0.1mm
(0.0039in) in depth due to seizure contamination.
Damaged more than 0.1mm(0.0039in) in depth.
Worn more than 0.5mm(0.02in) or abnormality.
Worn less than 0.5mm(0.02in).
Damage due to seizure or contamination remediable
within wear limit (0.5mm)(0.02in).
Worn more than 0.5mm(0.02in) or abnormality.
Worn less than 0.5mm(0.02in).
Damage due to seizure or contamination remediable
within wear limit (0.5mm)(0.02in).
Extruded excessively from seal groove square ring.
Square ring
Slipper ring 1.5mm(0.059in) narrower than seal
groove, or narrower than back ring.
Worn more than 0.5mm(0.02in) ~ 1.5mm(MAX.)
6-29
Extrusion
1.5mm (max.)
(0.059in)
(0.059in)
Remedy
Replace
Replace
Smooth with oilstone.
Replace
Smooth
Smooth
Replace
Smooth
Replace
Replace
Replace
Replace