Hyundai r35z-7 Workshop Manual page 344

(21) Apply grease to pin (12) install pins in
three holes of cylinder block (7).
(22)
Install retainer holder (13), retainer plate
(14) and piston sub assy (15). Apply
hydraulic oil in 99 holes of cylinder block
(7).
Only parking brake type
Install disk plate (18).
(23) Place the motor laterally, and install the
cylinder block sub assy regarding the
spline of the shaft as a guide.
Location of spline tooth of cylinder
block(7) should be aligned that of retainer
holder (13) to install them easily.
(24)
Push the cylinder block by hand, and
check that the spring contracts and
restores. Apply hydraulic oil to the sliding
surface of the cylinder block.
Confirm no foreign articles on surface of
cylinder block, marked a circle. If there are
foreign articles on it, wipe off them.
15
7-84
12
7
R35Z77TM66
13
14
18
7
R35Z77TM67
R35Z77TM68
R35Z77TM69