Hyundai r35z-7 Workshop Manual page 138

2) CLUSTER CHECK PROCEDURE
Start key : ON
(1)
Check monitor initial 6 seconds
a. All lamps light up.
Check monitor after 3 seconds : Indicate machine condition
a.
Tachometer : 0 rpm
b.
Fuel gauge : Pointed at appropriate level
c.
Engine coolant temperature gauge : Pointed at appropriate level
d.
Warning lamp
During start key ON the engine oil pressure lamp and battery charging lamp go on, but it is not
abnormal.
( ( 2)
Start of engine
Check machine condition
a.
Tachometer pointed at present rpm
b.
Gauge and warning lamp : Indicate at present condition.
When normal condition : All warning lamp OFF
When abnormal condition
a.
The lamp lights up.
b.
The lamp light up until normal condition.
4-4