Hyundai r35z-7 Workshop Manual page 353

3) DISASSEMBLY
(1) Clean pilot valve with kerosene.
Put blind plugs into all ports
(2) Fix pilot valve in a vise with copper(or
lead) sheets.
(3) Remove end of boot(32) from case(1)
and take it out upwards.
For valve with switch, remove cord also
through hole of casing.
(4) Loosen lock nut(24) and adjusting nut(22)
with spanners on them respectively, and
take out handle section as one body.
(5)
Remove the boot(32).
7-93
1408DA62
1408DA63
1408DA64
1408DA61