Hyundai r35z-7 Workshop Manual page 313

Remove the sun gear (1-17).
Remove the holder (1-11) and other
associated parts.
Secure the holder (1-11) in a vice and
¤Œ
loosen the screw (1-16) to remove the
thrust plate (1-15).
The screw is hard to remove because
loctite was used during assembly. To
facilitate the removal of the screw, warm
the screw with a drier.
Remove the following parts.
(1-14) Planetary gear
(1-13) Needle bearing
(1-12) Inner race
When replacing the taper roller bearings
(1-6) and (1-8), the collar (1-3) and the
plate (1-4), they are to be replaced by the
body assembly.
Remove the following parts.
(1-9) Plate
(1-10) Collar
1-16
1-12
1-13
1-14
1-11
1-8
1-9
7-53
1-17
R35Z77SM21
1-10
R35Z77SM22
1-15
1-10
R35Z77SM23
R35Z77SM24